FC-5000: Touchscreen not responding or accurate

Troubleshooting Instruction for unresponsive Touch Screen

Faça login ou registre-se no myTopcon para visualizar esta página:

FC-5000: Touchscreen not responding or accurate

BIOS Update:

  • Installing firmware BIOS (UEFI) version 22 or higher resolves a fairly uncommon potential cause to issues with the touchscreen.
  • Instructions and Bios update can be found on the FC-5000 Firmware and Software updates page


Performing a Hard Reset:

  • Performing a Hard Reset may get the touchscreen hardware to be visible and operational again. With the FC-5000 connected to the wall charger, hold the Power button for more than 17 seconds until the red LED stops flashing (this will disconnect all power and drain the system), wait a few seconds (for the system to complete draining, particularly the touch controller), wait a few more seconds (for power circuitry to re-connect), briefly press the Power button again, and then wait for the system to load. You may need to press the Power button again if pressed too soon.


Running slow or frozen:

Reloading the touch profile or a different touch profile may help. Follow these steps if unable to use the touchscreen.

  1. Use the bottom hardware keys (or if needed attach a USB keyboard or mouse) to navigate to the Start menu or screen, and then scroll down to select the "Touchscreen Profiles" utility tile icon.
  2. While in the "Touchscreen Profiles" utility, select one of the non-highlighted touch profiles to switch to and load that profile.
  3. Wait for the loading progress bar to complete.
  4. Test the capacitive touchscreen for accuracy using the selected input or condition (profile) you selected.


If the capacitive touchscreen is now responding accurately, if desired you can switch back to the previous touch profile.


As noted in the user guide (manual) for the FC-5000, the calibration tool in Microsoft Windows 10 is for a resistive touchscreen, the FC-5000 has a capacitive touchscreen. If the calibration tool is used, it may degrade touchscreen performance until a profile is loaded again as explained above.



Other potential fixes:

  • Removing an installed screen protector sheet may help, particular in wet and/or cold conditions.
  • Turning the FC-5000 sideways so the screen auto-rotates (as it does by default) may force the touch profile to refresh and hopefully resolve the issue.
  • If the touchscreen responds normally while at the blue screen which appears after holding the bottom-left hardware Windows logo (Start) button while briefly pressing the bottom-right hardware Power button, then the issue may be software related. Software related issues can be identified and resolved using Task Manager and other tools similar to as you would on a desktop computer.