Rover Configuration:
- Open TRU and connect to Rover in Reciever Managing Mode.
- Connect to receiver.
- Click on Receiver Settings.
- Click on Ports.
- Click the Input mode drop down for LongLink Client A
- Click on RTK RTCM 3.x
- Click Tracking & Positioning.
- Click the Positioning tab.
- Click RTK fixed
- Click Extrapolation.
- Click OK.
- Click Bluetooth.
- Click the ellipsis button.
- Select the Base Reciever.
Check to see if you are Communicating with the Base reciever
- Click Status.
- The Base and Rover are communicating.
- Disconnect from TRU.