GNSS PN-A5

PN-A5

Revolutionary
semi-hemispherical
GNSS antenna

Unmatched GNSS signal tracking and multipath reduction

Unmatched GNSS signal tracking and multipath reduction

Product Info

Pin-based, semi-hemispherical ground plane GNSS antenna

The PN-A5 antenna combines our TA-5 full-spectrum GNSS antenna element with an innovative convex impedance ground plane. The TA-5 antenna element utilizes an array of vertical dipoles to provide highly sensitive and stable full wave signal tracking for all existing and planned GNSS signals. Our new convex impedance ground plane provides improved multipath mitigation while providing minimum signal loss for satellites tracked to the horizon.

  • High-end geodetic antenna
  • Topcon TA-5 vertical convex dipole antenna element for full-spectrum GNSS signal tracking
  • Unique semi-hemispherical convex impedance ground plane
  • Environmentally robust and sealed
  • Minimized phase center offset variations in vertical within GNSS frequency band
  • Improved tracking for low-elevation satellites for signal tracking from the local horizon to zenith

 

PN-A5 is perfect for:

FIND A DEALER
Compare to Similar Products:
Specifications

PN-A5 Specifications

Print  
Performance
Operating Frequency Range
Lower:
1230 MHz±70 MHz
Higher:
1565 MHz±50 MHz
Gain at Zenith (90º)
Lower:
+6 dB (typical)
Upper:
+4.7 dB (typical)
Gain Roll-Off (from Zenith to Horizon)
Lower:
-12 dB (typical)
Upper:
-10 dB (typical)
LNA Gain
43 dB (typical)
Noise Figure
1.0 dB (typical)
VSWR
1.5 : 1
Physical and Environmental
Height*
262 mm
Weight**
6.7 kg
Operating Temperature
-50°C to +70°C
Storage Temperature
-55°C to +85°C
Humidity
95%, Method 507.5
Dimensions
Antenna:
D: 15” (380 mm)
H: 10.3” (262 mm)
Dome:
D: 15” (380 mm)
H: 11.5” (292 mm)
SCIGN dome:
D: 16.3” (415 mm)
H: 11.3” (287 mm)
*Antenna without Anti-snow Dome
**Antenna
Certifications and Standards
Vibration Rating
Method 514.6, Broad band noise (random vibration), Category 4, table 514.6C-IV)
Shock Rating
Method 516.6. Procedure I - Functional Shock, Table 516.6-I, Fig. 516.6-8, accelerative forces up to 40g.
Dust/Water Protection
IEC 60529 IP6X
IEC 60529 IPX7
Drop Test*
IEC 60529 IP6X. Repeated drops from the height of 1 m on concrete surface. All sides – top, bottom and border.
RoHS Compliant
Yes
*With Topcon or SCIGN Dome
Power and Electrical
Input Voltage Range
+3 to +12 VDC
Power Consumption*
100 mA
Connector
N-type
*Typical
Performance
Operating Frequency Range
Lower: 1230 MHz±70 MHz
 
Higher: 1565 MHz±50 MHz
Gain at Zenith (90º)
Lower: +6 dB (typical)
 
Upper: +4.7 dB (typical)
Gain Roll-Off (from Zenith to Horizon)
Lower: -12 dB (typical)
 
Upper: -10 dB (typical)
LNA Gain
43 dB (typical)
Noise Figure
1.0 dB (typical)
VSWR
1.5 : 1
Physical and Environmental
Height*
262 mm
Weight**
6.7 kg
Operating Temperature
-50°C to +70°C
Storage Temperature
-55°C to +85°C
Humidity
95%, Method 507.5
Dimensions
Antenna: D: 15” (380 mm) H: 10.3” (262 mm)
 
Dome: D: 15” (380 mm) H: 11.5” (292 mm)
 
SCIGN dome: D: 16.3” (415 mm) H: 11.3” (287 mm)
*Antenna without Anti-snow Dome
**Antenna
Certifications and Standards
Vibration Rating
Method 514.6, Broad band noise (random vibration), Category 4, table 514.6C-IV)
Shock Rating
Method 516.6. Procedure I - Functional Shock, Table 516.6-I, Fig. 516.6-8, accelerative forces up to 40g.
Dust/Water Protection
IEC 60529 IP6X IEC 60529 IPX7
Drop Test*
IEC 60529 IP6X. Repeated drops from the height of 1 m on concrete surface. All sides – top, bottom and border.
RoHS Compliant
Yes
*With Topcon or SCIGN Dome
Power and Electrical
Input Voltage Range
+3 to +12 VDC
Power Consumption*
100 mA
Connector
N-type
*Typical

Get support where and when you need it-
for all your Topcon products.

Online Support

A simple, free login entitles you to the following benefits:

  • Downloadable product manuals
  • Video tutorials and quick guides
  • Comprehensive training and documentation
Create a free myTopcon account
Extend Your Benefits

Register your product now to receive additional support including: 

  • Software and firmware updates
  • Product-specific notifications
Register your Product

We've got you covered

Need more info?

We can email you additional product information. Your contact information will never be shared.

Reach out

Reach out to one of our partners for more information or a price quote. Use the link below to find an expert in your area ready to help your business software needs.

View the event calendar

Topcon Positioning Systems, Inc.
7400 National Drive
Livermore, CA United States
For more information, and to locate a dealer closest to you, visit:
https://www.topconpositioning.com/#dealerModal
©2024, Topcon Positioning Systems, Inc.