Scanning IP-S3

IP-S3

Capture reality at vehicle speeds

Simply map, extract and deliver

Simply map, extract and deliver

Product Info

Compact, high-density, 3D mobile mapping system

This mobile mapping system offers high-density, high-precision point clouds, combined with high-resolution panoramas from a smaller, lighter system that is easier to handle.

The IP-S3 positioning system integrates an Inertial Measurement Unit (IMU), GNSS receiver (GPS and GLONASS), and a vehicle odometer. It provides precise positioning and attitude in a dynamic environment.

The rotating LiDAR sensor captures the environment with a rate of 700,000 pulses per second. During each rotation, the 32 internal lasers cover the full 360 degrees around the system, each from a slightly different viewing angle. This minimizes gaps in the point cloud which arise from obstacles or dead angles and removes the need for multiple scanners.

With a six-lens digital camera system the IP-S3 provides 360-degree, high-resolution spherical images that allow easy feature recognition. Mobile Master Office software handles all post-processing trajectories and georeferencing scans and images.

  • Integrated turnkey solution
  • Ultra-compact design
  • Minimized scanning shades from multiple lasers
  • Unparalleled ease of use
  • Factory calibrated
  • Full integration of clouds and images

 

Speed up mapping workflows

Our mobile mapping systems are the perfect solution when a massive amount of asset data must be collected in a short amount of time. By mounting a mapping system with various integrated sensors (GNSS, laser scanner, camera, IMU, wheel encoders) to a vehicle, users get all field data quickly. Just drive at normal speeds and get locations and visual detail of all roadside features, with no need to revisit the field for missing points. Simple office software can then be used for viewing, processing, projecting and exporting data for GIS or CAD software.

IP-S3 is perfect for:

FIND A DEALER
Compare to Similar Products:
Specifications

IP-S3 Specifications

Print  
General
Operating Temperature
Range 0°C to 45°C
(32°F to 113°F)
Storage Temperature
Range -30°C to 60°C
(-22°F to 140°F)
Calibration
Topcon calibrated for high precision
GNSS Tracking
Number of Channels*
226 universal channels, GPS, L1/L2, and GLONASS
*GNSS Receiver
Physical and Environmental
Dimensions*
260 mm (W) x 160 mm (D) x 121 mm (H)
Dimensions**
300 mm (W) x 500 mm (D) x 600 mm (H)
Weight
3.0 kg (6.6 lb)
Including sensors:
18 kg (39.6 lb)
Camera Unit***
CCD camera (6 pcs.)
*P-S3 timing Unit
**Sensor Unit
***Spherical camera
Operational
Timing Resolution
10 nsec
Gyro Bias Stability
1º/hr
Acceleration Bias Stability*
7.5 mg
Measurement Rate
700,000 points/sec
Range**
100 m @ 100% reflectivity, 70 m typical
Maximum Resolution***
8,000 × 4,000 pixels
Input Voltage
9V to 36V
Power Consumption
60W
*IMU
**Laser Scanner
***Spherical camera
Performance
Continuous Surveying Time*
8 hours
Surface Accuracy**
10 mm on road surface (1 sigma)
*(results in approx. 1 TB of data)
**Plane fitting results on flat road surface
General
Operating Temperature
Range 0°C to 45°C (32°F to 113°F)
Storage Temperature
Range -30°C to 60°C (-22°F to 140°F)
Calibration
Topcon calibrated for high precision
GNSS Tracking
Number of Channels*
226 universal channels, GPS, L1/L2, and GLONASS
*GNSS Receiver
Physical and Environmental
Dimensions*
260 mm (W) x 160 mm (D) x 121 mm (H)
Dimensions**
300 mm (W) x 500 mm (D) x 600 mm (H)
Weight
3.0 kg (6.6 lb)
 
Including sensors: 18 kg (39.6 lb)
Camera Unit***
CCD camera (6 pcs.)
*P-S3 timing Unit
**Sensor Unit
***Spherical camera
Operational
Timing Resolution
10 nsec
Gyro Bias Stability
1º/hr
Acceleration Bias Stability*
7.5 mg
Measurement Rate
700,000 points/sec
Range**
100 m @ 100% reflectivity, 70 m typical
Maximum Resolution***
8,000 × 4,000 pixels
Input Voltage
9V to 36V
Power Consumption
60W
*IMU
**Laser Scanner
***Spherical camera
Performance
Continuous Surveying Time*
8 hours
Surface Accuracy**
10 mm on road surface (1 sigma)
*(results in approx. 1 TB of data)
**Plane fitting results on flat road surface

Get support where and when you need it-
for all your Topcon products.

Online Support

A simple, free login entitles you to the following benefits:

  • Downloadable product manuals
  • Video tutorials and quick guides
  • Comprehensive training and documentation
Create a free myTopcon account
Extend Your Benefits

Register your product now to receive additional support including: 

  • Software and firmware updates
  • Product-specific notifications
Register your Product

We've got you covered

Need more info?

We can email you additional product information. Your contact information will never be shared.

Reach out

Reach out to one of our partners for more information or a price quote. Use the link below to find an expert in your area ready to help your business software needs.

View the event calendar

Topcon Positioning Systems, Inc.
7400 National Drive
Livermore, CA United States
For more information, and to locate a dealer closest to you, visit:
https://www.topconpositioning.com/#dealerModal
©2024, Topcon Positioning Systems, Inc.