Windows Mobile Device Center: Not supported in Windows 10

Windows 10 compatibility with Windows Mobile Devices

Log in of meld u aan voor myTopcon om deze pagina te bekijken:

Windows Mobile Device Center: Not supported in Windows 10

Windows 10

Microsoft officially ended support for Windows Mobile Device Center (WMDC, formerly ActiveSync) with Windows Vista. For newer operating system versions, if possible, it is highly recommended to use an alternative. Some alternatives are described in the following article.

Alternatives to Windows Mobile Device Center

Windows Mobile Device Center may not work in newer Windows versions, particularly Windows 10 version 1703 (Creators Update) OS Build 15063. If you  need to use Windows Mobile Device Center in a newer version of Windows, some possible methods to get it to work are as follows:


After installing Windows Mobile Device Center, if you are having difficulties running or connecting, download and run the following utility on your PC as an administrator.


Sometimes before being successful at installing Windows Mobile Device Center, you must first manually enable the required .NET Framework 3.5 under “Turn Windows features on or off” and/or by using the previous dotNetFx35setup.exe installer from Microsoft.

We highly recommend that you run the 64-bit drvupdate-amd64.exe or 32-bit drvupdate-x86.exe installer as an Admin and in "Compatibility Mode" for Windows Vista if Windows Mobile Device Center and the required drivers do not successfully install automatically through the Windows Update service when you connect USB.


After install and once "Windows Mobile Device Center" appears in the list under the Start menu on the desktop PC, similar to as is automatically applied by our "WMDC-Helper.exe" utility referenced above, you may need to run Windows Powershell as an adminstrator to apply the following registry commands, and then perform a Restart.


REG ADD HKLM\SYSTEM\CurrentControlSet\Services\RapiMgr /v SvcHostSplitDisable /t REG_DWORD /d 1 /f

REG ADD HKLM\SYSTEM\CurrentControlSet\Services\WcesComm /v SvcHostSplitDisable /t REG_DWORD /d 1 /f


This is less likely, but you may additionally need to open "Computer Management" as an Admin to view Services and Applications > Services to change the Properties of the “Windows Mobile-2003-based device connectivity” and “Windows mobile-based device connectivity” services to Log On using "Local System Account", and then Start each service. You may sometimes need to re-apply and Start these again when re-connecting device or after performing a Restart on the PC.


Even if you are not able to get WMDC to show it is connected, you may still be able to browse the contents of the device through File Explorer (which will appear as a drive under "This PC") or synchronize anyway.

Windows 10 Setup

The desktop installer for Microsoft Windows 10 may suggest that Windows Mobile Device Center (WMDC, formerly ActiveSync) is not compatible and must be uninstalled. This is as shown below:

Though the Microsoft Windows Compatibility web page states otherwise, as shown below.

Installing Microsoft Windows 10 using an ISO image instead, does not seem to require the re-installation of Windows Mobile Device Center after OS upgrade as does the desktop installer. Also, tests so far have shown that Windows Mobile Device Center seems to work as well in Windows 10 as it did in Windows 8, 7, and Vista. Some known issues may still apply.

If you have been forced to download and re-install  Windows Mobile Device Center in Windows 10, it is recommended to use the 32-bit or 64-bit links at the following web page.

Windows Mobile Device Center (ActiveSync) downloads